Heath Zenith notifi, Руководство пользователя

Страница: 7 / 13

6
Setup
Install the Chime and Push Button
5
To prevent possible SERIOUS INJURY or DEATH:
• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.
CHIME
1. Plug in the chime.
PUSH BUTTON
IMPORTANT: If you have a existing push button, disconnect power and remove the existing push button prior to installing the
Notifi push button. Cap off any wires individually with wire nuts.
1. Remove the back plate of the push button by pushing in tab on the bottom with a small screwdriver.
2. Remove the orange battery tab.
3. Temporarily hold the push button where it will be mounted and press the button. If the chime rings, mount the push button
in this location. If the chime does not ring, move the chime closer to the push button and test again.
4. Secure the push button to the door jamb or wall with the double-sided tape or screws.
SCREW INSTALL
DOUBLE-SIDED TAPE INSTALL
Remove material in screw holes (if needed) before
mounting with screws.