5
FIG.6
Rain Cap
Storm Collar
Top Plate
Cleanout Tee
Saf-T Liner with
Saf-T Wrap
Saf-T Liner
Masonry
Chimney
Cover Plate
Black Saf-T Liner
or Saf-T Pipe
Cleanout Access
Tee Cover
Fill
Cleanout Tee
Cleanout
Access
Appliance Tee
Cover
Plate
Tee Cover
Fill
Appliance Tee
FIG.5
HEARTH/FIREPLACE INSERT STOVE:
If installing a hearth or fireplace insert stove using an existing masonry
fireplace chimney, the length of rigid Saf-T Liner required will be the distance
from the chimney top to the top of the smoke chamber. Listed stainless
steel chimney liner components, an engineered Direct Connect Assembly
or any other method approved by the local building authority will be required
to pass through the smoke chamber/damper area to the appliance flue
collar. The liner assembly will be supported from the top of the chimney.
The installer must verify that there is at least 1 inch clearance to combustibles
outside a 3” nominal layer of masonry as well as 1 inch clearance from the
masonry to the connector inside the smoke chamber area for the entire
length within the smoke chamber area. Refer to Table 2..
FIREPLACE:
When lining an open fireplace, the total liner length will be the distance
from the top of the smoke chamber to the top of the masonry chimney.
This liner assembly will be supported from the top of the masonry chimney.
The liner may also be extended to the damper area if the smoke chamber
area is in poor condition. The installer must verify that there is at least 1
inch clearance to combustibles outside of a 3” nominal layer of masonry
to insure safe operation of the fireplace.
Refer to Table 2.
Storm Collar
Rain Cap
Top Plate
Saf-T Liner with
Saf-T Wrap
Masonry
Chimney
45° Elbows
Tee Cover
Appliance Tee
FIG.7
