background image

Table of Contents:

Page

Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Operating Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Common Installation & Operational Problems  . . . . . . . . . . . . . . . . . . .7

Preventive Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10

Parts Breakdown  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-14

Fuel Sizing Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-16

Installation and Maintenance Manual

Model S1505

Construction Heater

342 N. Co. Rd. 400 East • Valparaiso, IN 46383

219-464-8818 • 888-432-8924 • Fax 800-255-7985

www.heatwagon.com

WARRANTY

All new Heat Wagon and Sure Flame heaters and fans are guaranteed against defective materials and work-
manship for one (1) year from invoice date.

Warranty repairs may be made only by an authorized, trained and certified Heat Wagon dealer.  Warranty
repairs by other entities will not be considered.  Warranty claims must include model number and serial
number.

LIMITATIONS

Warrant claims for service parts (wear parts) such as spark plugs, igniters, flame rods will not be allowed.
Diagnostic parts such as voltage meters and pressure gauges are not warrantable.

Evidence of improper fuel usage, fuel pressures outside of manufacturer’s specification, poor fuel quality,
and improper electric power, misapplication or evidence of abuse may be cause for rejection of warranty
claims.

Travel time, mileage and shipping charges will not be allowed.  Minor adjustments of heaters are dealers’
responsibility.  Defective parts must be tagged and held for possible return to the factory for 60 days from
date of repair.  The factory will provide a return goods authorization, (RGA) for defective parts to be
returned.

No warranty will be allowed for parts not purchased from Heat Wagon.

Содержание S1505

















Отзывы: