059305-00 Rev. D
Heat-Timer Corp.
Lockout Menu
The Lockout menu is used to reset system lockouts.
NOTE:
A Lockout condition is only generated when Control Mode is set to TMC or ETV + TMC (see “Control
Mode” on page 26). Under specific conditions, the control triggers the alarm and logs the event in the Alarm
).
Reset Lockou
t
Default:
N/A
Selections:
RESET
Available in Control Modes:
TMC or ETV + TMC
Menu Path:
Lockout
Description:
The TMC Lockout outputs energize whenever the System Temperature rises above the Alarm Limit for
the Trigger Delay period.
To reset the lockout, the conditions causing the lockout must be corrected first. Then, the lockout can be
reset using the Reset Lockout menu. If the lockout was reset before the conditions are corrected, the
lockout output will immediately be re-activated.
ETV Platinum Plus Display and Programming 51
Содержание ETV Platinum Plus
Страница 9: ...ETV Platinum Plus Stainless Steel Valve Dimensional Specifications 9 059305 00 Rev D Heat Timer Corp...
Страница 31: ...Piping Diagrams 31 059305 00 Rev D Heat Timer Corp Figure 14B Two Mixing Valves and a TMC Safety Valve...
Страница 54: ...059305 00 Rev D Heat Timer Corp Notes 54 ETV Platinum Plus Installation and Operation Manual...
Страница 55: ...059305 00 Rev D Heat Timer Corp Notes ETV Platinum Plus Installation and Operation Manual 55...
