Heat Seal 112B, Руководство по эксплуатации и обслуживанию

Страница: 7 / 10

7
Revised 2019
RECOMMENDED MAINTENANCE
* MAKE SURE TO TURN OFF THE UNIT, UNPLUG IT
AND LET THE MACHINE COOL DOWN BEFORE CLEANING *
FILM CUT-OFF ROD

When the film cut-off rod is at room temperature it can be cleaned. Cleaning it will keep the rod clear of
debris that can affect its ability to cut.

First, cover the surface below the film cut-off rod with paper towels to catch any debris or overspray.
Then spray the film cut-off rod with FDA approved degreaser and allow it to soak. After a few minutes of
soaking, scrub the rod with a Scotch-Brite™ type of pad to remove any debris and wipe it clean.
CLEANING THE UNIT

The rest of the machine can be completely wiped down using a mild cleaning detergent and soft rags or
paper towels.

Occasionally wiping the cradle rollers when replacing film rolls is recommended. The film cradles are
stainless steel and should not be affected by floor cleanings. Food grade oil can be used to lubricate
the bearing surfaces in the cradle system as needed.