14
Operation
Cleaning & maintenance
To enjoy outstanding performance of your heater for years make sure you perform the
following maintenance activities on a regular basis:
•
Keep exterior surfaces clean .
•
Use warm soapy water for cleaning. Never use flammable, corrosive or abrasive
cleaners .
•
While washing your unit, be sure to keep the area around the burner and pilot
assembly dry at all time . If the gas control is exposed to water in any way, do NOT try
to use it . It must be replaced .
•
After a long break from operation, the unit should be inspected for spiders, spider
webs or other insects .
•
Air flow must be unobstructed. Keep controls. Burner and circulating air
passageways clean .
Signs of possible blockage include:
•
Gas odour with extreme yellow tipping of flame.
•
Heater does NOT reach the desired temperature .
•
Heater glow is excessively uneven .
•
Heater makes popping noises .
•
Spider and insects can nest in burner or orifices. This dangerous condition can
damage the heater and render it unsafe for use . Clean burner holes by using a heavy-
duty pipe cleaner . Compressed air may help clear away smaller particles .
•
Carbon deposits may create a fire hazard. Clean reflector and glass tube inside with
soapy water if any carbon deposits develop . Always be careful when cleaning the
glass tube .
Storage
Between uses:
•
Turn the control knob to “OFF” position .
•
Turn LPG cylinder to “OFF” position .
•
Store heater upright in an area sheltered away from weather conditions (such as rain,
sleet, hail, snow) .
•
If desired, cover heater to protect exterior surfaces and to help prevent dust and
debris collecting in air passages .
