13
Operation
Ignition Instructions
Check and ensure that an AA battery is inside the
ignition chamber and has power . Ensure the anode (+)
faces outwards .
1 . Ensure that the control knob is OFF . Slowly open
the gas cylinder valve .
2 . Press and turn the control knob to LIGHT position,
push the igniter to generate spark while keeping
control knob in pressed position
3 . Check for pilot flame through glass tube. If pilot does not light, turn control knob
to OFF position wait two minutes minimum and try again from the start . Several
attempts may be necessary .
4 . If the pilot s lit, keep control knob pressed for 15 seconds then turn the control knob
to LOW .
5 . For maximum heat turn control knob to HIGH .
6 . To turn heater off, turn control knob to OFF .
7 . Close the valve of the gas cylinder or the regulator after use .
OFF
LIGHT
LOW
HIGH
