manualshive.com logo in svg

Heat & Glo TIARAI-BK-IPI, Руководство по установке

Установочное руководство для камина Heat & Glo TIARAI-BK-IPI доступно для загрузки бесплатно на manualshive.com. Этот мануал поможет вам правильно установить и настроить ваш камин. Получите его сейчас, чтобы насладиться теплом и уютом в вашем доме.

Поделиться
Скачать
background image

Heat & Glo  •  TIARAI-BK-IPI, TIARAI-BR-IPI, TIARAI-CES-IPI Installation Manual  •  2342-980_R8  •  11/14

2

    Safety Alert Key:

• 

DANGER! 

Indicates a hazardous situation which, if not avoided will result in death or serious injury.

• 

WARNING! 

Indicates a hazardous situation which, if not avoided could result in death or serious injury.

• 

CAUTION!

 Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

• 

NOTICE:

 Used to address practices not related to personal injury.

Installation Standard work Checklist . . . . . . . . . . . . . . . . . . . . 3

1 Product Specific and Important Safety Information  

a.  appliance certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
B.  glass Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
c.  BtU Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
d.  high altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . . . 4
e.  Non-combustible Materials Specification. . . . . . . . . . . . . . 4
F.  combustible Materials Specification  . . . . . . . . . . . . . . . . . 4
g. electrical codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
h.  Requirements for the commonwealth of Massachusetts . . 5

2 Getting Started 

a.  design and Installation considerations . . . . . . . . . . . . . . . 6
B.  tools and Supplies Needed . . . . . . . . . . . . . . . . . . . . . . . . 6
c.  Inspect appliance and components . . . . . . . . . . . . . . . . . . 6

3 Framing and Clearances 

 

a.  appliance dimension diagram . . . . . . . . . . . . . . . . . . . . . . 7
B.  clearances to combustibles  . . . . . . . . . . . . . . . . . . . . . . . 8
c.  hearth extension/Floor Protection . . . . . . . . . . . . . . . . . . . 8

4 Termination Location and Vent Information   

a.  Vent termination Minimum clearances . . . . . . . . . . . . . . . 9
B.  chimney diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
c.  approved Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
d.  Use of elbows  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
e.  Measuring Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
F.  Venting guidelines for horizontal Runs . . . . . . . . . . . . . . 13
g. Vent diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5 Vent Clearances and Framing 

 

a.  Pipe clearances to combustibles  . . . . . . . . . . . . . . . . . . 30
B.  Wall Penetration Framing/Firestops . . . . . . . . . . . . . . . . . 30
c.  ceiling Firestop/Floor Penetration Framing . . . . . . . . . . . 31
d.  Install attic Insulation Shield . . . . . . . . . . . . . . . . . . . . . . . 31

6 Appliance Preparation 

a.  top to Rear Vent conversion . . . . . . . . . . . . . . . . . . . . . . 32
B.  Securing and leveling the appliance . . . . . . . . . . . . . . . . 35

7 Venting and Chimneys 

 

a.  assemble Vent Sections. . . . . . . . . . . . . . . . . . . . . . . . . . 36
B.  assemble Slip Sections . . . . . . . . . . . . . . . . . . . . . . . . . . 37
c.  Secure the Vent Sections . . . . . . . . . . . . . . . . . . . . . . . . . 38
d.  disassemble Vent Sections . . . . . . . . . . . . . . . . . . . . . . . 38
e.  Vertical termination Requirements . . . . . . . . . . . . . . . . . . 40
F.  horizontal termination Requirements  . . . . . . . . . . . . . . . 42

8 Electrical Information 

a.  general Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
B.  Wiring Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

9 Gas Information 

a.  Fuel conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
B.  gas Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
c.  gas connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
d.  high altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . . 48
e.  air Shutter Setting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

10 Appliance Setup 

a.  Remove Fixed glass assembly . . . . . . . . . . . . . . . . . . . . 50
B.   Remove the Shipping Materials  . . . . . . . . . . . . . . . . . . . 50
c.  clean the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
d.  Install the log assembly. . . . . . . . . . . . . . . . . . . . . . . . . . 51
e.  Install Fixed glass assembly . . . . . . . . . . . . . . . . . . . . . . 52

11 Reference Materials 

 

a.  Vent components diagrams  . . . . . . . . . . . . . . . . . . . . . . 53
B.  accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

 =  contains updated information.

Table of Contents

Содержание TIARAI-BK-IPI



























































Отзывы:

Нет отзывов

Похожие инструкции для TIARAI-BK-IPI

Pacific energy B Series Installation And Operating Instructions Manual preview
B Series
Бренд: Pacific energy Страницы: 20
Valor HORIZON 534XAN Installation & Operating Instructions Manual preview
HORIZON 534XAN
Бренд: Valor Страницы: 41
Magma CROSSOVER CO10-101-M Owner'S Manual preview
CROSSOVER CO10-101-M
Бренд: Magma Страницы: 18
Valor 1800JN Installation & Owner'S Manual preview
1800JN
Бренд: Valor Страницы: 60
Moda flame GF102401BK User Manual preview
GF102401BK
Бренд: Moda flame Страницы: 10
Napoleon LHD62N Installation And Operating Instructions Manual preview
LHD62N
Бренд: Napoleon Страницы: 60
Vents FFK 125 User Manual preview
FFK 125
Бренд: Vents Страницы: 28
Jøtul I 520 F Installation And Operating Instructions Manual preview
I 520 F
Бренд: Jøtul Страницы: 52
Flavel Caress Slimeline SC FNVC**SN User Instructions preview
Caress Slimeline SC FNVC**SN
Бренд: Flavel Страницы: 12
superior fires CORINTHIA BLACK NG Installation & User'S Instructions preview
CORINTHIA BLACK NG
Бренд: superior fires Страницы: 12
Contempo PFM (AGB) Installation Manual preview
PFM (AGB)
Бренд: Contempo Страницы: 10
Nu-Flame F350L Use & Maintenance Instructions preview
F350L
Бренд: Nu-Flame Страницы: 15
Astria 126730-01 Installation And Operation Instruction Manual preview
126730-01
Бренд: Astria Страницы: 44
Valor intimate Owner'S Manual preview
intimate
Бренд: Valor Страницы: 16
Napoleon EPA 1150 Installation And Operating Instructions Manual preview
EPA 1150
Бренд: Napoleon Страницы: 40
Better Homes and Gardens Granary BHW-10046 Manual preview
Granary BHW-10046
Бренд: Better Homes and Gardens Страницы: 68
Glen Dimplex OMC400LL Build In Instruction preview
OMC400LL
Бренд: Glen Dimplex Страницы: 5
IHP Superior Fireplaces WCT6820WS Installation And Operation Instruction Manual preview
Superior Fireplaces WCT6820WS
Бренд: IHP Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды