Heat & Glo Soho-N-AU Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 41

Heat & Glo Soho-N-AU Скачать руководство пользователя страница 41

Heat & Glo • SOHO-N-AU • 2197-900 Rev. C • 9/09

41

Heat & Glo, a brand of Hearth & Home Technologies Inc.

7571 215th Street West, Lakeville, MN 55044 USA

www.heatnglo.com

D. Contact Information

Please contact your Heat & Glo dealer with any questions or concerns.

For the location of your nearest Heat & Glo dealer,

please visit www.heatnglo.com.

Printed in U.S.A. - Copyright 2009

DO NOT DISCARD THIS MANUAL

CAUTION

• Leave this manual with

party responsible for use
and operation.

• Important operating

a n d m a i n t e n a n c e
instructions included.

• Read, understand and follow

these instructions for safe
installation and operation.

THIS PRODUCT MAY BE COVERED BY ONE OR MORE OF THE FOLLOWING PATENTS:
(United States) 4593510, 4686807, 4766876, 4793322, 4811534, 5000162, 5016609, 5076254, 5113843, 5191877, 5218953, 5263471, 5328356, 5341794, 5347983, 5429495,
5452708, 5542407, 5601073, 5613487, 5647340, 5688568, 5762062, 5775408, 5890485, 5931661, 5941237, 5947112, 5996575, 6006743, 6019099, 6048195, 6053165,
6145502, 6170481, 6237588, 6296474, 6374822, 6413079, 6439226, 6484712, 6543698, 6550687, 6601579, 6672860, 6688302B2, 6715724B2, 6729551, 6736133,
6748940, 6748942, D320652, D445174, D462436; (Canada) 1297749, 2195264, 2225408; (Australia) 543790;586383; (Mexico) 97-0457; (New Zealand) 200265; or other
U.S. and foreign patents pending.

For Service & Spare parts, please contact your nearest

Heat & Glo dealer:

Jetmaster Heat&Glo (Vic) P/L

444 Swan Street

Richmond VIC 3121

Phone: 03 9429 5573

Fax: 03 9427 0031

Jetmaster Australia

10 Martin Avenue

Arncliffe NSW 2205

Phone: 02 9597 7222

Fax: 02 9597 7622

SERVICE & SPARE PARTS

«
...
39
40
41

Содержание Soho-N-AU










































Отзывы:

Нет отзывов