manualshive.com logo in svg

Heat & Glo LifeStyle EXCLAIM-42, Руководство пользователя, Страница: 44 / 56

Поделиться
Скачать
Heat & Glo LifeStyle EXCLAIM-42 Скачать руководство пользователя страница 44

44

E. Combustible Mantel 

•  See Figure 11.11.
•  A combustible mantel may be positioned no lower 

than 12 in./305 mm (EXCLAIM-36) OR 20 in./508 mm 
(EXCLAIM-42) above the top of the 

fi

 replace opening.

•  A combustible mantel may have a maximum depth of 

12 in. (305 mm).

•  Combustible trim and materials cannot be placed within 

6 in. (152 mm) of the 

fi

 replace opening (top or sides).

•  Combustible materials projecting more than 1-1/2 in. 

(38 mm) shall not be placed within 12 in. (305 mm) from 
the top of the 

fi

 replace opening.

•  Combustible trim must not cover the metal surfaces of 

the 

fi

 replace.

•  Mantel clearance is in accordance with 

Section 7-3.3.3 

of

 ANSI/NFPA211

.

12 in. 

(305 mm) 

55-1/2 in. 

(1410 mm) 

Effective 

Height

*

Top of 

Fireplace

Opening

* EXCLAIM-36

12 in./305 mm

EXCLAIM-42

20 in./504 mm

Figure 11.11 Clearances to Mantels or other Combustibles above 
Fireplace

Heat & Glo • EXCLAIM-36, EXCLAIM-42 • 4013-251 Rev C • 11/08

Содержание EXCLAIM-42

























































Отзывы:

Нет отзывов