32
2" (5,1 cm) Nails
24"
(60,9 cm)
24-3/8"
(61,9 cm)
24"
(60,9 cm)
24"
(60,9 cm)
24"
(60,9 cm)
24-3/8"
(61,9 cm)
Install a
48" x 47-7/8"
roof panel flush to the
installed panel and flush at peak
(Fig. B)
.
Secure panel with (1) 2" nail in each corner.
Move the gable end rafter edge until it
is 1/2" from the
48" x 47-7/8"
roof panel
(Fig. C)
.
Finish securing panel with (2) 2" nails in
the corners.
3
4
5
PARTS REQUIRED:
10' x 12' ROOF PANELS
x12
2" (5,1 cm)
Fig. D
Maintain spacing between the center of the rafters
at the lower edge of the panels
(Fig. D)
.
Secure panels with (1) 2" nail into each rafter,
as shown.
Move to the top of the panel and keep spacing
between the center of the rafters.
Secure panels with (1) 2" nail into each rafter.
7/16 x 48 x 96"
(1,1 x 121,9 x 243,8 cm)
x1
NOTE:
Measurements from inside of gable panels
Flush at
peak
Fig. B
Move Gable
Flush
48"
x 4
7-7
/8"
1/2"
(1,2 cm)
Gable
End Rafter
Fig. C
2" nails
in each
corner
