HearthStone Tribute 8040, Руководство пользователя

Страница: 15 / 31

Hearthstone Quality Home Heating Products, Inc. ® Tribute Model 8040
12
(without moving the stove) when you periodically
inspection the stovepipe connection and chimney.
Install the stove as close as practical to the chimney,
while maintaining all proper clearances. Install
stovepipe that is as short and as straight as
possible. Horizontal runs of stovepipe should
always rise away from the stove a minimum of 1/4"
per foot (21mm/m).
Long runs of stovepipe to increase heat dispersal
are not recommended
. Using longer lengths of
stovepipe or more connecting elbows than
necessary increase the chances of draft resistance
and the accumulation of creosote buildup.
In general, you do not need to install a stovepipe
damper with the Tribute. Some installations,
however, could benefit from a stovepipe damper,
such as a tall chimney which can create a higher
than normal draft. In such cases, a damper can help
regulate the draft. The Tribute requires a draft
between 0.06" wc and 0.1" wc. For drafts above
0.1" wc, install a stovepipe damper. This should be
checked at installation time.
Remember, the NFPA has recommended, minimum
clearances for chimney connectors to combustibles
such as walls and ceilings. Once the stove is
installed at safe distances from these combustible
surfaces, it is important to maintain these connector
clearances for the remainder of the installation.
C
ONNECTING
Y
OUR
W
OODSTOVE
You can install your Tribute to a prefabricated metal
chimney or a masonry chimney.
P
REFABRICATED
M
ETAL
C
HIMNEY
There are two ways to install a prefabricated metal
chimney:
1. An interior installation where the chimney
passes inside the residence through the ceiling
and roof.
2. An exterior installation where the chimney
passes through the wall behind the stove then
up the outside of the residence.
Whenever possible, choose an interior chimney. An
interior chimney heats up more quickly and retains
its heat; thus promotes a better draft and
discourages the formation of creosote. An exterior
chimney does not benefit from the warmth of being
surrounded by the building, so it typically operates at
lower flue temperatures than an interior chimney.
An exterior chimney’s draft is not as strong and may
experience increased creosote accumulation.
When connecting the Tribute to a prefabricated
metal chimney, you must follow, precisely, the
manufacturer's installation instructions. Use only
Type HT (2100 deg. F), prefabricated metal
chimneys listed per UL 103 or ULC S629 standards.
WARNING: DO NOT CONNECT THE STOVE TO A
CHIMNEY FLUE SERVING ANOTHER APPLIANCE.
En
sure the size of the chimney’s flue is appropriate
for the Tribute. The Tribute requires a 6" (152 mm)
inside diameter flue for new installations. A 6”
diameter
flue provides adequate draft and
performance. You can use an 8" (203 mm) diameter
existing flue with a reducer. An oversized flue
contributes to creosote accumulation. (In this case,
bigger is NOT better.)
When purchasing a prefabricated chimney to install
with your stove, be sure to also purchase from the
same manufacturer the wall pass-through (or ceiling
support package), "T" section package, fire-stops
(when needed), insulation shield, roof flashing,
chimney cap, and any other needed accessories.
Follow the manufacturer’s instructions when
installing the chimney and accessories. In addition,
be
sure to maintain all manufacturers’
recommendations for the proper clearances to the
chimney.
M
ASONRY
C
HIMNEY
Consider two primary elements when connecting
your stove to a masonry chimney: the chimney itself
and the thimble where the stovepipe connects to the
chimney. Use only Code approved masonry
chimneys with a flue liner.
Before connecting to a masonry chimney, hire a
professional to examine the chimney for cracks,
loose mortar, and other signs of deterioration and
blockage. If the chimney needs repair, complete
them before installing and using your stove. Do not
install your stove until the chimney is safe for use.
Figure 8: Typical Masonry Fireplace Connection