HearthStone
Quality Home Heating Products Inc
®
Clydesdale Model 8490
30
With the baffle out of the firebox, remove the flue collar as described in step five. Place the flue collar
in the firebox and insert the Clydesdale unit into the fireplace opening. Drop the flue liner (meeting UL
1777) into the firebox through the flue collar opening. Attach the flue liner to the collar, push the collar
and flue up to the top of the firebox, making sure the collar slips onto the four bolts, and secure it by
turning the nuts back onto the bolts and tighten with a 7/16” wrench.
Place the baffle / secondary air assembly back into the firebox.
Note: The baffle material is a high temperature ceramic. It will last for years under normal use,
however it can be easily damaged by impact or
force. BE CAREFUL IN HANDLING, TO APPLY PRESSURE TO THE TUBES AND CAST
IRON ONLY!
a.
Place the baffle inside the stove with the ceramic board facing up, and the stainless steel shelf tabs
forward.
b. Lift the baffle and slide the baffle sleeves, on the rear of the baffle, into the slots on the rear of the unit.
The slots on the baffle will drop back onto the threaded rods in the back of the firebox
c.
Push in until the sleeves are completely in the slots.
d. Gently lower the front of the baffle until the shelf tabs are resting on the sidewall.
e.
To verify that the baffle is in correct position, gently tug down on the front of the baffle. If it does not
come down. It is in the place. Replace the nuts removed in step one / photo one.
Step Seven
: With the unit located in the desired position within the fireplace, level the unit using a
9/16” socket wrench on the three leveling bolts (see photo #10 on the next page).
F
IGURE
#2
Baffle installed
into the firebox