Hearthstone Quality Home Heating Products, Inc ARIES 16/26/46 Series 8905, 8915, 8925
17
Placing the Burner Glass Media
The burner glass media poly-bag that you set aside when you unpacked the fireplace contains the
correct amount of glass material to cover the burner. DO NOT add any additional media to the media
supplied with your fireplace. The entire contents of the bag should be evenly distributed over the
burner tray.
1.
Locate the burner in the fireplace.
Refer to the adjacent illustration.
2.
Carefully clip one corner of the poly-
bag to form a pouring spout. The
opening should be large enough to
allow the glass media to flow but not
so large that you can’t control the
flow.
3.
You will notice that the burner
surface is designed with turned-up
edges that form a tray to hold the
glass media.
4.
Starting at one end, pour the glass
media onto the burner tray, keeping
the pouring spout on the poly-bag
toward the center of the burner to
avoid spillage of glass pieces over
the sides of the burner. See the
adjacent illustrations.
5.
Once you have poured all of the
glass burner media into the burner
tray, carefully smooth the glass
pieces out so they have a uniform
depth over the entire surface of the
burner. When the burner glass
media is properly placed, it should
look like the adjacent illustrations.
Note: If a few pieces of glass escape over
the edges of the burner tray during
installation, it is not a problem. They will
simply land in the area below the burner
and will do no harm.
