Hearthstone Quality Home Heating Products, Inc.
DVI-44 Model 8860
17
damage. The unit should be square and true. Any
sheet metal parts should be smooth and free of
bends and dents. If visible or concealed damage is
found or suspected, contact your dealer for
instructions.
Always use gloves and eye protection when handling
the decorative ceramic fire logs, and burner. Use
care when handling these parts as they are fragile
and subject to damage and breakage if handled
roughly.
See the firebox access instructions on page 188 and
remove the log set. Unpack and inspect the logs for
damage. Inspect the ceramic burner. Open the other
boxes and inspect the components. If log, burner, or
any other component damage is encountered,
contact your dealer for a replacement. Otherwise, set
the logs and other components aside until called for
during the installation.
Dismounting from Pallet
With all accessory boxes removed and set aside,
remove the shipping carton, then remove the 4 lag
screws and shipping clips that fasten the unit to the
pallet.
Have someone help lift the insert up and off the
pallet, taking care to avoid damaging components
mounted on the insert.
Figure 10
– Shipping Clip Detail
Figure 11
– Leveling Bolt Detail
Leveling Screws
If your hearth/fireplace surface in uneven, or is not
level, you can adjust the four provided leveling
screws. Adjust the screws
using a ¼” wrench only
enough to keep the insert from rocking, or wobbling.
INSTALLER
: Leave
this manual with the
appliance.
CONSUMER:
Retain
this manual for future
reference.
«
INSTALLATEUR :
Laissez cette notice avec
l’appareil.
CONSOMMATEUR :
Conservez cette notice
pour consultation
ultérieure.»
