19
Vent-Free Gas Log Heater User Manual
Installation (cont.)
BEFORE INSTALLING THE HEATER
• Turn off the gas supply to the fireplace or firebox.
• Clean the fireplace floor and chimney before installing the heater. Seal any ash, and clean out doors to
protect the unit from down drafts.
MOUNTING PROCEDURE
• Place the grate/burner assembly into the firebox.
• Using the log set as a guide, drill four (4) 5/32" diameter holes approximately 1" deep into the floor of
the firebox.
• Anchor the grate/burner assembly to the floor using
f
our (4) concrete attachment screws (not
included)(see Fig. 16).
Fig. 16—Mounting Locations
1/4" x 3/4" Concrete Hex Head
Flanged Attachment Screws
