Hearthland Hiawatha, Инструкция по установке и эксплуатации

Страница: 26 / 49

VS0952_E 12/30/2009 26
O
PERATING
I
NSTRUCTIONS
(C
(C
ONTINUED
ONTINUED
)
)
ADJUSTING STOVE SETTINGS:
The HEAT LEVEL and FAN SPEED settings may be changed at any time during start ‐ up or run mode.
SETTING HEAT LEVEL:
⇒
Press “START / HEAT LEVEL” repeatedly until it is at the HEAT
LEVEL You Wish the stove to run.
⇒
Please note that heat setting one is used for start up, higher heat
settings will not take effect until after start up mode is complete.
⇒
Please note that changing HEAT LEVEL will change the FAN SPEED
to the default speeds indicated in red on the HEAT LEVEL table.
⇒
Please note that the Enclosure Fan used to maintain internal
component temperatures receives power only on HEAT LEVEL #4.
SETTING FAN SPEED (Room Heat):
⇒
Press “FAN SPEED” repeatedly until it is at the setting you wish the stove to run at.
⇒
The lights indicate one of five fan speeds.
⇒
Please note that changing HEAT LEVEL will change the FAN SPEED to the default speeds indicated
in red on the HEAT LEVEL table.
⇒
Please note that specific FAN SPEEDS are allowable at each HEAT LEVEL per the HEAT LEVEL ta ‐
ble .
1 2 3 4
HEAT LEVEL
ALLOWABLE FAN SPEEDS
(Red = default)
Enclosure
Fan
1
1
,2,3,4,5
OFF
2
1
,2,3,4,5
OFF
3
3
,4,5
OFF
4
3
,4,5
ON
HEAT LEVEL TABLE
1 = LOW
2 = MEDIUM
4 = TURBO I
3 = HIGH
5 = TURBO II