3
4050-308 Rev A 9/13/2007
When using electrical heaters, basic precautions should
always be followed to reduce the risk of fire, electric shock
and
injury to persons, including the following:
•
Read all instructions before using this heater.
•
This heater is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces. If provided, use handles
when moving this heater. Keep combustible m a t e r i a l s ,
such as furniture, pillows, bedding, papers, clothes and
curtains away from sides and rear of heater, and at
least 36 in. (914 mm) from the front.
•
Extreme caution is necessary when any heater is used
by or near children or invalids and whenever the heater
is left operating and unattended.
•
Always unplug heater when not in use.
•
Do not operate any heater with a damaged cord or plug
or after the heater malfunctions, has been dropped or
damaged in any manner. Return heater to authorized
service facility for examination, electrical or mechanical
adjustment, or repair.
•
Do not use outdoors.
•
This heater is not intended for use in bathrooms, laundry
areas and similar indoor locations. Never locate heater
where it may fall into a bathtub or other water container.
•
Do not run cord under carpeting. Do not cover cord with
throw rugs, runners, or the like. Arrange cord away from
traffic areas and where it will not be tripped over. Do not
coil cord.
•
To disconnect heater, turn controls to “OFF” then remove
plug from outlet.
•
Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause an
electric shock or fire, or damage the heater.
•
To prevent a possible fire, do not block air intakes or
exhaust in any manner.
•
An heater has hot and arcing or sparking parts inside. Do
not use it in areas where gasoline, paint, or flammable
liquids are used or stored.
•
Use this heater only as described in this manual. Any
other use not recommended by the manufacturer may
cause fire, electric shock, or injury to persons.
•
Always use properly grounded, fused and polarized
outlets.
•
Always use ground fault protection where required by
electrical code.
•
Always disconnect power before performing any
cleaning, maintenance or relocation of the heater.
•
To prevent a possible fire, do not burn wood or other
materials in this heater.
•
To prevent electric shock or fire, always use a certified
electrician should new circuits or outlets be required.
•
When transporting or storing the heater, keep in a dry
place free from excessive vibration and store as to avoid
damage.
•
SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
•
Changes or modification not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
IMPORTANT INSTRUCTIONS
Содержание Simplifyre SFE-26
Страница 9: ...9 4050 308 Rev A 9 13 2007...
