Battery installation
•
Open battery compartment
○
9 inserting small screwdriver into
slot at the bottom of the pager and lift. Insert two AA alkaline
batteries according to polarity label.
Power indication
•
The indicator
○
5 flashes green once every 30 sec. if batteries
operate correctly.
•
The indicator
○
5 flashes yellow once every 5 sec. to indicate
batteries are low and need changing.
Pairing
Please note
: this set should already be paired and ready to use. If
for any reason set requires re-pairing, please follow instructions below.
•
Press the pager TEST/RESET button
○
7 three times within 2s to
enter pairing mode. When unit is in pairing mode orange light
○
3
will flash
three times followed by red
○
2 and white
○
4 flashing.
•
EchoAlert® Vibrating Pager is now set as master unit and can be
paired with accessories. It will stay in pairing mode for 10 seconds.
•
If the pairing is successful, the blue, red, orange, and white LEDs
flash rapidly 5 times.
