•
Turn unit off using on/off switch in battery compartment.
•
Press and hold pairing button and switch unit ON at the same
time.
•
Red LED light comes on for approx. 3 sec. Once red light goes out
release pairing button and press it once again quickly.
•
EchoAlert® Sound Sensor is un-paired from master unit.
Installation:
•
Place the product within 10cm of the chosen device for example
alarm, siren, intercom etc. When the product detects the sound,
the red indicator will flash once and will trigger EchoAlert®
Vibrating Pager (master unit).
Low battery indicator:
•
The EchoAlert® Vibrating Pager indicator
○
4
flashes white once
every 5 sec. to indicate EchoAlert® Sound Sensor batteries are low
and need changing.
Switching unit off:
•
Turn switch to OFF position (Switch located in the battery
compartment)
