14
IX. Maintenance
Caution:
The HV Contact Spring may store a slight charge even after the unit
is powered off. Avoid direct contact with the HV Contact Spring.
9.1 Cleaning The Filter
To extend the effective life of the Integrated Filter Module, remove the filter
from the unit and use a standard vacuum to remove collected particulate from
the Pre-Filter section.
9.2 Cleaning Filter Compartment
Visually inspect the interior of the Filter Compartment when the filter is
removed from the unit during the filter replacement process. If particulate has
accumulated in the Filter Compartment, clean the interior of the unit as follows:
9.2.1 Turn the Power Off, unplug the Power Cord from the Power Socket,
remove the Access Door, and remove the filter from the unit.
9.2.2 Vacuum and remove any debris that has accumulated in the filter
compartment and adjacent accessible areas of the interior of the unit.
9.2.3 Properly replace the Access Door, as described in Section 8.2.
Fig. (8)
– Cleaning Filter Compartment
Thumb
Screw
Access Door
Filter
Filter Compartment
HV
Contact
Spring
Safety
Switch
