9
VII. Operation Guidelines
7.1 Source Capture System Positioning
Place the HealthyAir
®
Portable Air Purification System in the desired location
and place the Acoustic Mat under the unit to dampen its sound.
7.2 Source Capture System Activation
7.2.1 Plug the Power Cord into the Power Socket, located on the bottom of
the side panel of the unit, and then plug the other end of the cord into a
wall power socket.
Once plugged in, the Power indicator light [
]
will turn on and
display a red light.
7.2.2 Activate the unit by pressing the Power button located on the Control
Panel, shown in Fig. 4, or on the Remote Control.
Once the unit is powered, the motor will start with the Fan Speed set to
the Mid-Speed and the eHEPA® indicator will light up and display a
green light, which indicates that the eHEPA® system is activate.
7.3 Source Capture System Controls
Each of the respective control elements shown on the Control Panel Display in
Fig. 4 work as follows:
•
SPEED
button, on the Control Panel and Remote Control, adjusts the
volume of airflow being taken in through the hood. Airflow speed can be
adjusted to one of three settings: Low
– Mid – High Speed.
•
eHEPA
button, on the Control Panel and Remote Control, turns the
eGrid on and off. When the eGrid is powered the symbol above the
eHEPA button, as well as the eGrid Active light, will turn green.
Pressing the eHEPA button once more will shut off the eGrid and turn
off the indicator light.
