8
6. Hold the Left Shield (21) against the left side of
the Seat Frame (2) in the indicated location.
Attach the Left Shield (21) to the Seat Frame (2)
with three ST4 x 16mm Screws (57) and three
M4 Washers (45).
Attach the Right Shield (not shown) in the
same way.
7. Have a second person hold the Long Link Arm
(10) and the Short Link Arm (11) and align the
holes near the ends of the Link Arms. Place two
Plastic Washers (49) between the holes in the
Link Arms.
Attach the Handlebar Swing Arm (5) to the Long
Link Arm (10) and the Short Link Arm (11) with
an M8 x 35mm Bolt (17) and an M8 Locknut (7).
8. Place the Seat (20) on the Seat Frame (2). Slide
the Seat Washer (38) onto the Seat Knob Bolt
(43) and then tighten the Seat Knob (37) onto it.
Slide the Weight Bracket (8) onto the Seat
Frame (2).
Make sure that the Weight Bracket
slants away from the exerciser.
Align the holes in the Weight Bracket (8) with the
holes in the end of the Seat Frame (2). Insert
the M8 x 120mm Bolt (52) through the Weight
Bracket and the Seat Frame. Then, tighten an
M8 Locknut (7) onto the end of the Bolt.
6
7
8
2
21
45
45
57
57
45
5
10
7
17
49
8
20
7
52
43
2
38
37
57
11
