6
• To hire an authorized service technician to
assemble the exerciser, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
• To identify small parts, see page 5.
• In addition to the included tool(s), assembly
requires the following tools:
two adjustable wrenches
one rubber mallet
one Phillips screwdriver
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
ASSEMBLY
1. Attach the Front Stabilizer (31) to the Main
Frame (1) with two M6 x 62mm Bolts (53), two
M6 Washers (55), and two M6 Locknuts (54).
Do
not tighten the Locknuts yet.
1
54
31
53
53
55
55
54
1
1
2. Attach the Rear Stabilizer (661) to the Main
Frame (1) with two M6 x 62mm Bolts (53), two
M6 Washers (55), and two M6 Locknuts (54).
See step 1.
Tighten the M6 Locknuts (54).
66
2
