background image

English

OVERVIEW

Thank you for choosing the P.T.Rail Angled from HealthCraft. Please read 

and understand the instructions in this manual; keep manual for future 

reference. It is your responsibility to see that your P.T.Rail Angled is 

properly assembled, installed, and cared for. Failure to follow instructions in 

this manual could result in serious injury or death. If you are not equipped 

to undertake the outlined work, we would recommend that you have your 

P.T.Rail Angled installed by a qualified contractor. 

The P.T.Rail Angled is a high quality, commercial grade, fold down rail for 

use on short staircases. The P.T.Rail Angled is intended for moderate 

vertical and horizontal load bearing to provide assistance and support for 

people with reduced mobility. The P.T.Rail Angled is intended to bear 

weight ONLY when the handle is in the down position; the handle is not 

intended to bear weight in any other position. The P.T.Rail Angled handle is 

intended to be folded up when not in use. A friction hinge ensures that the 

handle will not inadvertently lower when it is in the up position. The P.T.Rail 

Angled is installed with appropriate fasteners to a structural wall. 

LIMITED LIFETIME WARRANTY

Products are covered by a limited lifetime warranty against defects in 

materials and workmanship for the original purchaser. Warranty excludes 

products that have been damaged through misuse, accidental damage, 

alteration, normal wear and tear, wood material and stain, or the use of 

corrosive or abrasive cleaning products. 

Buyer hereby indemnifies, agrees to hold harmless and defend HealthCraft 

Products Inc. from and against any and all liabilities, claims, (founded and 

unfounded), losses, damages, costs and expenses (including without 

limitation consequential damages and reasonable professional fees) 

resulting from buyers specification, application, or improper use of goods 

described hereon; buyers omission or neglect. HealthCraft Products Inc. 

does not assume any liability for damage resulting from services performed 

by others or faulty installation, misuse or misapplication of goods sold by 

HealthCraft Products Inc. HealthCraft Products Inc. shall not be liable for 

prospective profits or special, indirect, or consequential damages, or for the 

cost of any corrective work done without HealthCraft Products Inc. prior 

approval. HealthCraft Products Inc. total liability hereunder shall in no 

event exceed the purchase price of the goods specified hereon. 

Specifications subject to change without notice.

HealthCraft Products Inc.

2790 Fenton Road

Ottawa, Canada 

K1T 3T7

DELIVERY CONTENTS - P.T.RAIL ANGLED 

FIGURE A.

 

1. P.T.Rail Angled

2. Extension Screw

3. Jam Nut 

4. Washer, 1/4", Lock (x4)

5. Washer, 1/4", Flat (x4)

6. 1/4" x 3" length Lag Bolt (x4)

P.T.RAIL ANGLED INSTALLATION WARNINGS 

FIGURE B.

1. P.T.Rail must be installed to walls that are structurally sound. Add wood 

blocking if required.

2. If installation into concrete wall is required, we recommend sleeve or 

wedge type anchors suitable for wall construction.

3. CAUTION - Do not install if structure behind wall is unknown.

4. CAUTION - Do not install into metal studs.

5. CAUTION - Only use rail for assistance in down position. Use caution 

when moving rail.

6. CAUTION - Pinch point between rail and wall plate.

7. CAUTION - Be careful when on stairs.

Supplied fasteners for wood structure only. If using other fasteners, ensure 

screw retention force rating at least 600lbs/272kgs.

INSTALLATION 

  FIGURE 

C.

1. Hold P.T.Rail in desired location and ensure unobstructed rail travel in 

all positions, and the space above rail is adequate to fold.

2. Using wall plate a template, mark off hole locations.

3. Drill pilot holes appropriate for fasteners.

4. Secure P.T.Rail to wall using appropriate fasteners.

5. To change angle of rail, insert shaft of screwdriver thru drive hole of  

extension screw and turn.

6. Turn jam nut until it is tight with end of rail.

7. Turn both jam nut and extension screw together to jam tight.

8. Remove screwdriver.

PRODUCT USAGE

See Figure D.

TECHNICAL DATA

 

See Figure E.

Gate 88

Kanalgatan 45B

Skellefteå, Sweden

93123

6

EC

REP

Отзывы: