Assembly and setup of Recumbent Bike
16
C. how to assemble the Seat
1. Take out Seat Stopper at right of aluminum slide
by using 3mm wrench.
Unfasten 5 bolts at rear shroud and take out rear
shroud.
2. Inset cable of heart rate sensor into hole on
aluminum slide.
Pull seat adjust lever and slowly insert seat
assembly
from the back of aluminum slide.
Connect cable of heart rate sensor to connector
from body.
Assemble rear shroud and seat stopper
in reverse order.
Required tools-1
Required tools-2
B. M5*20 hexagon head wrenche bolt
B. M5*10 Pan Head Screw
M5*20 Pan Head Screw
A. 3mm L-wrenche
A. Phillips Screwdriver
Required tools-1
A.
3mm L-wrenches
B.
M5*20 Hexagon head wrenche bolt
Required tools-2
A. Phillips Screwdriver
B.
2pcs of M5*10 Pan Head Screw
3pcs of M5*20 Pan Head Screw
1
2
Seat Stopper
