16
QUICK START / OPERATING INSTRUCTIONS (CONT)
9. With no weight on the scale, the tare value will remain on the display until changed, cleared,
or until the scale is powered off.
10. To remove the Tare, press the
TARE
button again. The word “TARE” will disappear from the
display and the tare value will be cleared from the display. The scale will resume normal
operation.
Weighing a Patient
Note:
When this scale is powered on, it will always default to the settings and units last used
(LB or KG).
1. Make sure there is no object on the weighing platform.
2. Press the
ON/OFF
button to power the scale on.
3. Wait until the “0.0” LB or “0.0” KG appears on the display.
4. Ask the patient to step on the scale. The scale will begin to display weight information and will
lock on the patient’s weight when the stable weight of the patient is determined. Depending on
the movement of the patient on the scale, it may take several seconds for the scale to lock onto
the weight.
5. Once a weight has been displayed, while the patient is still on the scale, Health o meter
recommends performing a second weighing by pressing the
REWEIGH
button.
6. The weight may be held on the display by pressing the
HOLD/RELEASE
button. To release,
press the
HOLD/RELEASE
button again.
7. After the weight measurement has been taken and is recorded, have the patient step off the
scale.
8. Press the
ON/OFF
button to power the scale off.
Weight Recall
The last weight reading on the scale can be recalled by pressing the
RECALL
button. To clear
the display of the recalled weight, press the
ENTER
button.
Note:
Clearing the recalled weight from the display will not clear the recalled weight from
memory. The recalled weight will remain in memory until another weight is obtained.
