8
500KL ASSEMBLY INSTRUCTIONS (CONTINUED)
Assembling the 500KL Scale (Refer to Figures 1 - 11)
Caution: It is recommended that the assembly be performed by two persons.
1. Carefully remove the scale platform
C
and columns
A
and
B
from the carton. Place the scale
platform and columns on a flat, level, and dry surface (see Figure 1).
2. Remove the 4 small screws and washers from the bottom of column
B
(see Figures 1 & 2).
3. Locate cable connector inside column
A
(see Figures 1 & 3).
4. While holding column
A
, slide the cable connector through the top of column
B
. The top of
column
B
has a notch (see Figures 1 & 5).
5. Plug the cable connector into the RJ jack, located on the scale platform
C
(
see Figures 1 & 4).
Note:
Ensure that the cable connector is correctly plugged into the RJ jack.
6. Align
column
A
and column
B
. Snap the locking tab into place. Ensure that the locking tab is
locked securely into place (see Figures 1 & 5).
7. Position and secure the connected columns
A
and
B
to the scale platform
C
.
8. Insert the 4 small screws through the bottom of the scale platform
C
screw holes and into
column
B.
Ensure that washers are located between the screw heads and the scale platform
C
screw holes (see Figures 1, 6, & 7).
9. Using a Phillips head screwdriver, tighten the screws to secure column
B
to the base of the
scale platform
C
(see Figure 1, 6, & 7).
Note:
Ensure that the screws are fully tightened to prevent damage to the scale.
10. Locate the upper height rod
D
and lower height rod
E
from the carton (see Figure 1).
11. Align the upper height rod
D
with the lower height rod
E
. Snap the locking tab into place.
Ensure locking tab is securely locked (see Figures 8 & 9).
12. Position the bottom of the fully assembled height rod into the height rod opening
G
at the top
of the upper column
A
. Press locking tab
F
inward to insert the height rod into the height rod
opening
G
(see Figures 1 & 10).
13. The scale is now assembled and ready for use (see Figure 11).
Содержание 500KL
