Health in motion 421, Руководство по сборке и эксплуатации

Страница: 6 / 20

Lower Upright
4 – ½” x 3 ¼” Carriage Bolts
STEP 2
4 – ½” Flat Washers
4 – ½” Lock Nuts
Female Base Tube Male Base Tube
Male Base Tube Female Base
Tube
STEP 1
Step 1: Connect the Male Base Tubes to the Female Base Tubes as shown in the diagram above.
Step 2: Attach the Lower Upright to the Base Tubes using:
Four (1/2” x 3 ¼” Carriage Bolts)
Four (1/2” Flat Washers)
Four (1/2” Lock Nuts)
NOTE: Make sure Base Tubes are angled downward, and that drain holes near
the outside end caps are facing downward.
NOTE: Tighten Bolts Now
Page 5