Health in motion 421, Руководство по сборке и эксплуатации

Страница: 13 / 20

(Figure 1)
Head Cross Assembly Enlarged View
STEP 13
STEP 14
Note the orientation of the Head Cross Assembly
If the holes do not line up correctly, rotate the
Head Cross Assembly 180 degrees horizontally.
2 – 3/8” x 2 ¾” Carriage Bolts
2 – 3/8” Flat Washers
Arc Support Tubes 2 – 3/8” Lock Nuts
(Figure 2)
Fabric
Head Cross Assembly
(Figure 1)
Step 13: Attach Head Cross Assembly to Arc Support Tubes using:
Two (3/8” x 2 ¾” Carriage Bolts)
Two (3/8” Flat Washers)
Two (3/8” Lock Nuts)
NOTE: Tighten Bolts Now
(Figure 2)
Step 14: Wrap Fabric around Head Cross Assembly and Velcro to under side.
NOTE: Be sure to pull fabric tight before securing Velcro.
NOTE: Velcro MUST have full area engagement. To ensure maximum Velcro adhesion,
apply pressure while rubbing on both sides of Velcro engagement region.
Page 12