Health in motion 421, Руководство по сборке и эксплуатации

Страница: 10 / 20

Arc Support Tubes
STEP 9
NOTE:
Bolts do not get
installed in these
holes until step 10
Bent Seat Tubes
(with
threaded holes on this
end to the outside)
Step 9: Attach the Bent Seat Tubes (with threaded holes on bottom end to the outside)
to the Arc Support Tubes using:
Two (3/8” x 2 5/8” Carriage Bolts)
Two (3/8” Flat Washers)
Two (3/8” Lock Nuts)
NOTE: On bottom end of Bent Seat Tubes, make sure weld is to the inside and
threaded holes are to the outside.
NOTE: Tighten Bolts Now
Page 9