5
Step 2.
Apply the larger piece
of dual lock to the back of the
power supply.
2
1
Step 3.
With one hand holding
the power supply and the other
holding the remaining piece of
long dual lock, position both to
allow enough slack so as not pull
the barrel connector out of the
refrigerator.
3
Step 1.
Peel the protective
backing from the dual lock.
Mounting Power Supply
HCL recommends attaching the power supply to the wall or a surface
with the provided dual lock tape. If the unit is not attached, the
weight of the power supply could cause the unit to come unplugged.
Note:
Wire tie the remaining wire
with the provided wire ties, so it is not a
trip or snag hazard.
