Health Care International PhysioStep MDX, Руководство пользователя

Страница: 19 / 20

1.3 Trouble Shooting Guide for the PhysioStep MDX
Console does not
display the RPM Value.
Heavy resistance when
you begin pedaling
1. Damaged Generator or Lower Control
PCB
1. Remove the Console Control Wires,
if there is now less resistance it may be
caused by a wrong the VR Default Value.
2. Remove the Console Control Wires,
if it still has heavy resistance when
pedaling it may be a damaged Lower
Control PCB.
Cause
1. Console wire is disconnected or
connected improperly.
2. Low Batteries in the Display
3. Damaged Console Control Wire
4. Damaged Generator, Console PCB or
Control PCB
5. Unit not plugged into wall outlet
1. Brake Control Wire is improperly
connected or damaged
2. The Console PCB or Low Control PCB
may also be damaged
Solution
1. Detach and Re-connect brake control
wires to make sure they are connected
properly
2. Replace Damaged Power Boards if needed
1. The component will need to be repaired or
replaced by a qualified technician.
1 and 2. In both cases, this component will
need to be repaired or replaced by a qualified
technician.
1. Detach and Re-connect console wires to
make sure they are connected properly
2. Replace the Batteries in the Display
3. Replace any damaged Wires, Control
Panels or Generators
Malfunction
The display console
does not turn on when
pedaling lightly.
Console works well but
torque value is zero.
Warranty Information :
Serial #: ___________________ Purchase Date : _______________
3 Year Parts Warranty, One Year Labor, Lifetime Frame Warranty
INSTRUCTION MANUAL: PhysioStep Display Console
18