HEADRUSH Pedalboard, Быстрый старт

Страница: 7 / 64

7
Basic Operation
This chapter describes some of HeadRush Pedalboard’s basic functions. You can visit
headrushfx.com to
download the complete user guide for even more information.
Main Screen
Important : The sequence of models in your signal chain is not necessarily reflected in the footswitches. You can
freely assign models to available footswitches without changing your signal chain at all—and vice versa. See
Hardware Assign to learn about this.
To assign a model (amp, cab, or effect) to an empty slot , tap it (

) and then use the list
that appears. See Rigs > Creating a Rig to learn about this.
To show a model’s parameters on the right edge of the screen , tap the model so it is
outlined in green. You can then turn the parameter knobs to adjust the parameters to
their left. Tap anywhere in the column of those three parameters to show the next three (if
the model has more than three parameters).
When no model is selected, these parameters will be ones that you assign in the
Hardware Assign screen.
To show a model’s settings screen , double-tap it. Its settings screen will appear with
its preset menu, parameters, and assigned color.
To activate or deactivate a model , press the footswitch assigned to it, or tap the
model’s footswitch in the display .
To load another rig (preset):
•
Press the upper-left ( Rig

) or lower-left ( Rig

) footswitch to load the previous
or next rig immediately.
•
Tap the

or

next to the name of the current rig on the screen.
•
Tap the name of the rig on the screen and then turn the encoder .
To view other options , tap the

button in the upper-right corner, and then tap an option.
To rearrange the
models in your signal
chain
, tap and drag a
model to another slot
or between two other
models (the ones after
that position will shift
one slot further down
the signal chain).
Tap and drag this bar downward to view list of rigs.
Rig name.
Double-tap a model,
In , or Out to show its
parameters.
Turn the parameter knobs to adjust these parameters. When a model is
selected, tap anywhere in this column to show the next three parameters.
Tap for more options.
Tap to save rig.
Turn encoder to move
through selectable
items onscreen or to
adjust parameters.
Press
encoder as an
Enter command.
Tap its footswitch to
activate or deactivate it.
Tap to view setlists.