4
Rear Panel
1.
Power Input
(19 VDC, 3.42 A, center-positive): Connect this input to a power outlet using the
included power adapter.
2.
Power Adapter Restraint
: Secure the power adapter cable to this restraint to prevent it from
accidentally unplugging.
3.
Power Switch
: Press this button to turn the HeadRush Looperboard’s power on. Press and hold
this button to turn the HeadRush Looperboard’s power off.
4.
Vent
: Make sure this vent is unobstructed while using the HeadRush Looperboard.
5.
Inputs
(XLR or 1/4”/6.35 mm,
balanced
): Connect your guitar, instrument, drum machine,
keyboard, or other audio source to these inputs. You can enable or d48V phantom power
for these inputs in the
Global Settings
page.
Important:
Only enable phantom power if your microphone requires it. Most dynamic microphones
and ribbon microphones do not require phantom power, while most condenser microphones do.
Consult your microphone's documentation to find out whether it needs phantom power.
6.
Aux Input
(1/8”/3.5 mm, TRS): Connect an optional audio source (e.g., smartphone, tablet, etc.)
to this input. Use the
Aux
knob to control the volume level.
7.
Outputs
(XLR): Connect these outputs to the inputs of your mixer, active loudspeaker, etc. Use
the
Main
knob to control the volume level. You can adjust the ground-lift setting for these outputs
in the
Global Settings
page.
8.
Outputs
(1/4”/6.35 mm,
balanced
): Connect these outputs to the inputs of your amplifier, audio
interface, mixer, etc. Use the
Main
knob to control the volume level. You can switch the level of
these outputs between
Amp
and
Line
in the
Global Settings
page.
9.
Phones Output
(1/4”/6.35 mm, TRS): Connect stereo headphones to this output. Use the
Phones
knob to control the volume level.
10.
Expression Pedal Input
(1/4”/6.35 mm, TRS): Connect an optional expression pedal to this input.
11.
MIDI In
(5-pin DIN): Use a standard MIDI cable to connect this input to the MIDI output of an
optional external MIDI device. See
External MIDI Control
for more information.
12.
MIDI Out
/
Thru
(5-pin DIN): Use a standard MIDI cable to connect this output to the MIDI input of
an optional external MIDI device. You can set this output to be a standard MIDI output or MIDI
throughput in the
Global Settings
page.
13.
USB Type-B Port
: Connect this USB port to a computer using a standard USB cable. This
connection allows the HeadRush Looperboard to send and receive the digital audio signal to and
from your computer. You can also use this connection to import or export loops, individual audio
files, backing tracks, etc. See
USB Connection
for more information.
This connection is also used to update the firmware. Visit
headrushfx.com
to check for available
firmware updates.
Содержание Looperboard
Страница 92: ...92 ...
Страница 96: ...Tippen Sie hier für weitere O i v 2 0 0 ...
