2
1
th
installation instructions
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
About Equipment installation, please note the following:
1
.
Power supply
This device uses 100-240V AC input voltage , In order for the device to work
properly.
2
.
Power
Equipment is required when moving or other jobs that require power, to turn off
all the power, pull the plug, in order to ensure the safety of you and your
equipment.
3
.
Cable
Not in power cable, signal lines, communication lines, such as cable, cables were
crushed or squeeze should be avoided to prevent danger of leakage or short
circuit.
4
.
Signal cable connections
Plug from the device, pull the signal line, the device need to power down, so as
not to damage the device. Charge plug damage is not covered under warranty.
5
.
Openings
Outer surface of the device may be cooling holes, do not plug the hole, so as to
avoid heat accumulation and damage equipment or cause a fire risk.
6
.
Equipment installation
Reasonable placement of equipment, such as loading standard rack, chassis,
Cabinet, or placed on a solid, flat work surface to prevent equipment fell.
7
.
Environment
Equipment working environment, pay attention to dust, moisture, especially to
prevent liquids from soaking and splashed into the device.
8
.
Maintenance
