9
Can be used for single source or multiple sources to connect to the device at
the same time, manually switch the corresponding port through the remote
control
3. split mode
A variety of stitching modes can be selected through the submenu, such as
1x2, 1x3, 1x4, 2x2 mode, etc. Normally, the split mode is set before leaving the
factory and no need to set.
4, Board, card ID -Flip
After selecting the "board ID" number, set whether the ID number image
needs to be rotated 180 degrees in the menu "Flip".
5, the language
Menu can be selected by remote control: English , Simplified Chinese,
traditional Chinese, three different menu display language.
5
th
pressing setting
The functions of the button control are the same as remote control. as
follows:
Menu Key
:
Pop up the main menu, repeated press the Menu button
repeatedly to make the cursor stay in different submenus
Select/
Modify the red submenu parameters
Save/exit
Save the modified parameters and exit the menu
HDMI:
Switch to HDMI source in
MHL:
Switch to MHL source in
DP:
switch to DP source in
