Transmitter
Receiver
TV
AMP/AVR
Help is only an email away:
.
14
Diagram 1
In this diagram, an audio device (TV) is acting as a source and is
being fed into the XTND Audio (300) transmitter “Digital (IN)” port.
This is then extended via Cat5e or Cat6 cable to the XTND Audio
(300) receiver where the signal is converted to analogue stereo and
output from the “Stereo (Out)” port to an AVR or amp.
The mode switch on the XTND receiver should be set to “Digital”
to enable the DAC so Optical audio can be routed to the analogue
“Stereo (Out)” port correctly (see page 11).
Example wiring diagram
Note:
This XTND system has been designed so that it can be
installed in multiple ways. The purpose of the diagram
is to illustrate a typical/example setup. If you are unsure
how you might install this device in to your property then
contact [email protected] or a HDA Pro (https://
hdanywhere.com/dealers-and-installers/).
RCA Cable
Cat Cable
Optical Cable
Diagram 1.
