4
FACT-1 FRONT PANEL DESCRIPTION
1. TEST CABLE CONNECTOR
- 3 binding posts for making connections to the individual
phases of the feeder. Each post is labeled to correspond to a particular phase of the feeder.
2. LCD DISPLAY
- The Liquid Crystal Display (LCD) for displaying instructions, messages,
and ammeter current.
3. SELECTOR KNOB
- This rotary switch selects which phase is being tested at any
given time. When the knob is in the STANDBY position, no phase is selected.
4. SELF-TEST
- Pressing this button initiates the Feeder All Clear Test Set the self-test
mode to assure proper operation. The test cable assembly must be removed during
the self test.
5. POWER
- This button is the master power switch for the Feeder Ammeter Clear Test
Set. It is a latching pushbutton type. Pressing this button powers up all the electronics
and fan for operation
6. AMMETER CLEAR
- Pressing this button provides 120V AC to the selected binding
post (Phase). It is a momentary pushbutton type. The button should not be pressed for
long periods of time since substantial heat can develop in the unit when there is a
ground on the feeder.
7. POWER CORD
- Power cord for the unit. Cord must only plug into a 120V AC, 60Hz,
non-GFCI 15 ampere outlet.
1
2
3
5
4
6
