2
IMPORTANT SAFETY NOTES
IMPORTANT!
Please read the Operator's Manual thoroughly before operating the unit.
Having a complete understanding of the Feeder Ammeter Clear Test (FACT-1) operation
and issues that may influence its performance is key to obtaining the maximum
effectiveness of this unit.
The FACT-1 outputs 120VAC to the cable under test and therefore extreme caution must
be exercised to prevent electrical shock.
Never obstruct the intake or exhaust grills in the cord storage compartment.
Never attempt to close the cover while the unit is operating or while any cables are
connected.
Do not connect the FACT-1 unit to a GFI protected circuit.
Before connecting the FACT to any circuit, test and ground that circuit to verify it is both
de-energized and discharged.
DO NOT use the FACT-1 if any chance of a back feed exists.
The FACT-1 contains sensitive electronic parts. Although the housing is rugged, care
should be taken to prevent any impact to the unit. An impact could damage the internal
circuitry or display. The unit should never be opened except by the manufacturer. No user
serviceable parts are inside.
