HCO
3-Advanced Setting SG550/SG530
Page 21
be highlighted.
4.
Press the OK key to delete or press the MENU key to cancel and exit.
3.3 Live Monitor
In the TEST mode, you can do all the settings, such as camera mode and trigger interval time. After
you switch to the Live mode, the camera starts monitor automatically.
After the camera enters into the Live mode, the motion indicator LED (red) on the front of the camera
will blink for about 10s. This time is released for you to make the camera ready for automatic
surveillance. After the indicator stops blinking, the PIR starts to work.
When human or animal appears in the range of the camera lens, the PIR can detect them and gives the
camera a signal to start to take picture(s) or video as programmed. The PIR will be deactivated for pre-
defined trigger interval time and then be reactivated after trigger interval time is over. The PIR is
sensitive to temperature. The higher temperature and larger object, the longer distance the camera can
detect. The longest distances the PIR can detect are 65ft at 32F and 20ft at 90F.
3.4 Sensible Angle and Distance Test
If you want to know whether the camera can detect a certain spot, you can test according to the
following:
1.
Switch the camera to the Test mode.
2.
Make movements around a certain spot in front of the camera. If the PIR indicator LED blinks,
it indicates that position can be sensed. Otherwise, that place is out of the sensing area.
3.5 File System
This camera supports two kinds of file formats: FAT12 and FAT16. With both formats the SD card can
save pictures and videos.
•
You don’t need to concern the file format of the camera unless you have problems with
reading the SD card. If this happens, please format the SD card in the camera or in a computer
first and then insert the card into your camera to try again.
•
The default file format of this camera is FAT16.
•
Most computers can read data from SD card with format FAT16.
•
When you format a SD card in your computer, you should choose the file format as FAT16.
Normally FAT16 is recommended unless your other image viewer is equipped with FAT12
format.
3.6 File Name
This camera uses SD card to save images and videos in the pre-named folder \DCIM\100EK113. Each
new image or video will be numbered incrementally, e.g., IM000001.JPG or IM000001.AVI. .JPG is
an image file and .AVI is a video file.
