HCL L-19 series Скачать руководство пользователя

Страница: 61 / 83

Inserting and Removing an ExpressCard

To insert an ExpressCard:

1. Locate the ExpressCard slot on the left side of the computer.

2. Slide the ExpressCard, with its label facing up, all the way into the slot until the rear connectors click into

place.

3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-

screen instructions to complete the process.

To remove an ExpressCard:

1. Double-click on the Safely Remove Hardware icon found on the

Windows taskbar and the Safely Remove Hardware window appears
on screen.

2. Select (highlight) the ExpressCard from the list to disable the card.

3. Push the ExpressCard slightly to release the card.

4. Pull the card out of the slot.

Internal Components Upgrade

You can upgrade your computer by changing the CPU and hard disk or adding memory. However, to avoid
damage during the installation procedure, please ask your dealer for help. Do not install an internal component
by yourself.

4-5

Expanding your computer

Содержание L-19 series




















































































Результаты поиска

Содержание L-19 series

Отзывы:

Похожие инструкции для L-19 series

Бренды по названию

Популярные бренды

HCL L-19 series, Руководство пользователя

Результаты поиска

Содержание L-19 series

Отзывы:

Похожие инструкции для L-19 series

Бренды по названию

Популярные бренды