210997
2
Vedpak 233_Version 1_10.2020
I. INTRODUCTION
The tester is for 12V Vehicles with 13 or 7-pin
socket. For use of the
7-pin
socket, use
13/7 pin
towing adaptor. The cable is long enough for the
user to do the test while sitting in the
vehicle.
The
tester can also do self-test (does not
work
for 7-pin
socket)
,
12V power check
,
ignition
,
reversing light.
CAUTION:
The self-test is not available with 13/7 pin towing adaptor
because there is no continuous feed via the 7-pin socket.
II. OPERATION
1. Connect the tester
with
the
vehicle's
towing socket. Make sure to line up the
male and female socket correct. Twist the out plug ring clockwise to lock the plug
.
2.
If the 12V power line of the socket is working correctly, the
"12V
CONTINUOUS"
indication
will
light up
.
3.
Press the
"
Test
"
to check the tester circuit and LED indication.
4.
Turn the ignition on the vehicle to
"ON"
position, do not start the
vehicle's
engine.
The
"
12V IGNITION
"
indication shall light up.
5.
For MOT test
,
please do in turns:
1) S
w
itch
on
left
and
right hand light.
2) Switch on
the side light.
3) Switch on the fog light.
4) Depress the foot brake pedal.
6.
User can also check the reverse light by
"
REVERSE" indication.
7. To remove the tester after the test, please twist the out plug ring anti-clockwise
to unlock the plug
13/7 pin Connection
13-PIN
7-PIN
Insert
