© 2015 HBX Controls
6
SETUP MENU
1) TARGET TEMP
78
°F
2) MODE
3) SYSTEM SETUP
4) TIME
Target Temperature
Change the minimum/maximum temperature for
your zone depending on if your zone is set up for
heating or cooling. If the temperature in the zone
falls below/rises above this temperature, heating or
cooling will come on.
SETUP MENU
1) HEATING TEMP
70
°F
2) COOLING TEMP
75
°F
3) CHANGEOVER
AUTO
4) MODE
5) SYSTEM SETUP
6) TIME
Heating Temperature
Change the minimum temperature for your zone.
If the temperature in the zone falls below this
temperature, heating will come on.
SETUP MENU
1) HEATING TEMP
70
°F
2) COOLING TEMP
75
°F
3) CHANGEOVER
AUTO
4) MODE
5) SYSTEM SETUP
6) TIME
Cooling Temperature
Change the maximum temperature for your zone.
If the temperature in the zone increases above this
temperature, cooling will come on.
Changeover
Auto: this option allows you to change automatically
from heat mode to cool mode or vice versa
Heat: Allows the user to be only in heat mode
Cool: Allows the user to be only in cool mode
This option is only available when you
select “YES” in View Auto options in the Special
Functions screen.
Applicable to: Heat/Cool, 2Heat/Cool and
2Cool/Heat modes.
SETUP MENU
1) HEATING TEMP
70
°F
2) COOLING TEMP
75
°F
3) CHANGEOVER
AUTO
4) MODE
5) SYSTEM SETUP
6) TIME
MODE OPTIONS
This option allows you to select between Room, Floor and Dual sensor modes.
If you are setting your Thermostat as a
DHW
Zone, see
Zone Demand
on page
9. Selecting
DHW
will automatically configure your sensor.
SETUP MENU
1) SCHEDULE
2) MODE
3) SYSTEM SETUP
4) TIME
Mode Setup
This setting takes you to the Mode Setup menu, and
allows you to select the thermostat mode.