HBS 93-10-0702A Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 78

HBS 93-10-0702A Скачать руководство пользователя страница 12

12

ARC 800 Order No. BA 93-10-0702A Issue 01.03.08

1.3

General Safety Inﬆructions

Improper operation of the power unit is LIFE-THREATENING!

Threat to life
– by electric shock and arc
– by toxic vapors and airborne particles
– by red-hot metal spatters (ﬁre risk)
– by blow-up of explosive gases and materials
– by ﬆrong magnetic ﬁelds for persons ﬁtted with a pace maker
In addition, through improper use damage to the ﬆud welding unit

and to material can be caused. For details, see chapters 1, 3 and 5.

1.4

Intended Use

Warning: Unauthorized interference with the ﬆud welding unit

as well as unauthorized alteration of the ﬆud welding unit are

prohibited and result in complete cancellation of any guarantee

and liability claims againﬆ HBS.

Operation of the power unit is only allowed with HBS welding

guns, this clause is also part of ”use as directed”.

The power unit is intended to weld welding elements according to actual standards (see

chapter 5 and appendix). Any other use is regarded as not used as directed. The

manufacturer is not liable for damages resulting from the stud welding unit not used as

directed. Any risk is carried by the user.
The power unit is designed according to specific standards and accident prevention

regulations. Basics are European Union guidelines and in Germany valid standards.

Please note that in your country additional ﬆandards and safety conditions (especially

rules for accident prevention) may diﬀer from the ﬆandards mentioned in this operating

manual.

The power unit was manufactured to the latest developments in technology and

is regarded as safe to operate (place of operation see section 8.1).
The welding guns A 12, A 16, AI 06 and CA 08 can be connected to the HBS power unit

ARC 800. For details please contact the HBS customer service (address see page ii).

Check in any case the operating manual of the HBS welding gun whether this

power unit can be used.

Observing the operating manual of the used welding gun is also part of the ”use as

directed”.

«
...
10
11
12
13
14
...
»

Содержание 93-10-0702A















































































Отзывы:

Нет отзывов