HBM we2111, Быстрый старт

Страница: 15 / 108

WE2111
A3983-1.0 en/de/fr 15
Fastening screws
Fig. 5.2 View from rear, connection of optional modules
"
Hand-tighten the two fastening screws for the module
(
Fig. 5.2
).
The module is then ready for operation.
Depending on the module type, settings may need to be
implemented, e.g. which input/output should be used and
how. Further information can be found in the Operating
Manual.
Use shielded cables for the analog outputs. The cables
for the digital inputs/outputs only need to be shielded if
the cable length exceeds 30 m.