
Electrical connection
18
A01639_02_X00_00
HBM: public
TN
7
Electrical connection
The torque transfer standard comes supplied with a ready‐made 6‐wire con
nection cable (with Lemo
R
connector on transducer side, pig tails on amplifier
side). A plug fitting is also possible on request (
Measurement signal (+)
Supply voltage (-)
Sensor circuit (-)
Sensor circuit (+)
Supply voltage (+)
Measurement signal (-)
Cable shielding
WH
GY
BK
RD
BU
GN
Sockets Torque/Bending moments
Fig. 7.1
Sockets pin assignment
The connector sockets on the torque transducer TN are labeled accordingly.
bending moment
bending moment
torque