HBM T4A Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 20

HBM T4A Скачать руководство пользователя страница 5

5

T4A, T4WA-S3

In this manual, the following symbols are used to refer to residual dangers:

Symbol:

DANGER

Meaning:

Maximum danger level

Warns of an imminently dangerous situation in which failure to comply with
safety requirements will result in death or serious physical injury.

Symbol:

WARNING

Meaning:

Potentially dangerous situation

Warns of a potentially dangerous situation in which failure to comply with
safety requirements can result in death or serious physical injury.

Symbol:

CAUTION

Meaning:

Potentially dangerous situation

Warns of a potentially dangerous situation in which failure to comply with
safety requirements could result in damage to property or some form of
physical injury.

Symbol:

NOTE

Means that important information about the product or its handling is being
given.

Symbol:

Meaning: CE mark

The CE mark enables the manufacturer to guarantee that the product
complies with the requirements of the relevant EC guidelines (see Declaration
of Conformity at the end of these Mounting Instructions).

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

«
...
3
4
5
6
7
...
»

Содержание T4A





















Отзывы:

Нет отзывов