HBM T20WN, Инструкция по монтажу, Страница: 25 / 88

Specifications
T20WN A0726-14.0 23
Nominal torque
M
N
200 100 50 20 10 5 2 1 0.5 0.2 0.1 N·m
Mass moment of
inertia of the rotor
(around the axis
of rotation) with
the speed measur­
ing system
(x10
-3
)
gm
2
0.06 0.06 0.06 0.063 0.068 6.1 6.13 6.23 53.7 54.6 57.2
Balance quality-le­
vel per DIN
ISO 1940
-
G 6.3
4)
Each type of irregular stress (bending moment, lateral or axial load, exceeding nominal torque)
can only be permitted up to its specified limit value provided none of the others can occur at the
same time. If this condition is not met, the limit values must be reduced. If 30 % of the bending
limit moment and lateral force limit occur at the same time, only 40 % of the axial limit force is
permissible and nominal torque must not be exceeded. The permissible bending moments, axial
forces and lateral forces can affect the measurement result by approx. 1 % of nominal torque.
5)
Please comply with the maximum torque (T
Kmax
) of the couplings.
6)
Nominal torque must not be exceeded.
7)
Relative undulation following DIN 45670/VDI 2059.