HBM PW15AHi, Инструкция по монтажу, Страница: 15 / 72

15
PW15AHi
A2526-4.0 en/de/fr HBM
6 Electrical connection
6.1 PW15AHi pin assignments
IMPORTANT
The PW15AHi must be operated with a supply voltage up to 30 V.
Incorrect connections between the supply and the interface cables can
cause irreversible damage.
Check the correct assignment of the connections before switching on for
the first time.
Any HBM guarantee is rendered invalid for damage caused by incorrect
connections.
The PW15AHi is fitted with an 8 pin connector socket.
Connector socket,
8 pin, made by
Lumberg
8
2
3
4
6
7
1
5
Fig. 6.1 Electrical connection
Terminal RS‐485 CANopen DeviceNet Color code for
1‐Kab165‐3
1)
1 GND GND GND white
2 unassigned unassigned unassigned brown
3 RA CanH in CanH in green
4 Trigger / Stop Dosing Trigger / Stop Dosing Trigger / Stop Dosing yellow
5 RB CanL in CanL in gray
6 TB CanL out CanL out pink
7 TA CanH out CanH out blue
8 12...30 V 12...30 V 12...30 V red
1)
Cable 1‐KAB165‐3 is available as an accessory.
Take into account the relevant cable length restrictions for your bus system,
which are dependent on the baud rate.